Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 32 subscribers
  • Views 755 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Disconnecting cables in panels

MrJack96
What is best practice in terminating disconnected cables I.e inside and electrical panel( control wiring or power cables)/JB?
Parents
  • Former Community Member
    0 Former Community Member
    Providing all elements of the installation is earthed in accordance with the wiring regs any spare cores should terminated into either spare terminals or connector blocks - just leave enough length in case they are needed in future.


    I accept that you’re in maintenance but are you qualified to be working on control panels?
Reply
  • Former Community Member
    0 Former Community Member
    Providing all elements of the installation is earthed in accordance with the wiring regs any spare cores should terminated into either spare terminals or connector blocks - just leave enough length in case they are needed in future.


    I accept that you’re in maintenance but are you qualified to be working on control panels?
Children
No Data

Community Rules & Guidelines