Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 119 replies
  • Subscribers 32 subscribers
  • Views 17518 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Type A rcd . EICR coding ? etc

aligarjon
Hi Guys.   Not been on for a long time, just had a bit of a search and couldn't really find anything so thought i would ask and see what you all thought.


1.  Are we or will we be coding type AC rcd's if there are LED's or induction hobs, lots of electronics  etc  present.

2. How much DC leakage does it actually take to saturate an rcd and cause  problem?

3. How much does a standard LED lamp or induction hob  leak ?

If we test an AC RCD with no load and it's fine then re-test it with all LED lights, induction hobs etc turned on and it operates correctly could we then say that it is ok with a note on EICR  OR EIC if installing any of the above.  


Obviously also on an EICR if the RCD then doesn't operate with it all on it becomes a C2 ?


Any thoughts



Gary
Parents
  • 0
    Chris Pearson:
    Alcomax:
    No, but the cables in walls do.



    Not being facetious, honest ? but the boiler is not buried in the wall.


    Is this a case of a fear that new boiler manufacturers guarantee may be voided by their spurious "requirements" not being met?


    No, my fear is that the boiler may trip a type AC RCD in the same way as the VSD in my lathe does. We shall find out in due course. In the mean time, I have contacted the manufacturer (Worcester).




    In addition to the manufacturer knowing there may be issues with Type AC RCD's, this is another possibility.


Reply
  • 0
    Chris Pearson:
    Alcomax:
    No, but the cables in walls do.



    Not being facetious, honest ? but the boiler is not buried in the wall.


    Is this a case of a fear that new boiler manufacturers guarantee may be voided by their spurious "requirements" not being met?


    No, my fear is that the boiler may trip a type AC RCD in the same way as the VSD in my lathe does. We shall find out in due course. In the mean time, I have contacted the manufacturer (Worcester).




    In addition to the manufacturer knowing there may be issues with Type AC RCD's, this is another possibility.


Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines