Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 16 replies
  • Subscribers 32 subscribers
  • Views 1226 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Relocation of kitchen so let etc

Former Community Member
Former Community Member
Hi all was wondering what you all do when asked to relocate sockets during a kitchen refit, specifically where you have made a joint in an existing 2G backbox which is no longer going to be used?


Do you just fit a blanking plate over, let the tiler tile over or terminate in wago connectors and let the plaster bury the joint?


Regards Ts
Parents
  • Former Community Member
    0 Former Community Member
    Forgot to mention that the circuit is protected by an RCD so I'm thinking that even the last option is viable since the wago connectors should be maintenance free and the buried cable is protected via the RCD.
Reply
  • Former Community Member
    0 Former Community Member
    Forgot to mention that the circuit is protected by an RCD so I'm thinking that even the last option is viable since the wago connectors should be maintenance free and the buried cable is protected via the RCD.
Children
No Data

Community Rules & Guidelines