Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 16 replies
  • Subscribers 32 subscribers
  • Views 1226 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Relocation of kitchen so let etc

Former Community Member
Former Community Member
Hi all was wondering what you all do when asked to relocate sockets during a kitchen refit, specifically where you have made a joint in an existing 2G backbox which is no longer going to be used?


Do you just fit a blanking plate over, let the tiler tile over or terminate in wago connectors and let the plaster bury the joint?


Regards Ts
Parents
  • 0
    Will the terminals be in a safe zone, in a maintenance free enclosure, and will they be safe from the customer drilling there in the future?

    If so, there isnt a lot of difference between joining cables in a maintenance free box, and a buried straight cable run, so I would consider doing it unless there wasnt any other way of removing the cable.
Reply
  • 0
    Will the terminals be in a safe zone, in a maintenance free enclosure, and will they be safe from the customer drilling there in the future?

    If so, there isnt a lot of difference between joining cables in a maintenance free box, and a buried straight cable run, so I would consider doing it unless there wasnt any other way of removing the cable.
Children
No Data

Community Rules & Guidelines