Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 16 replies
  • Subscribers 32 subscribers
  • Views 1235 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Relocation of kitchen so let etc

Former Community Member
Former Community Member
Hi all was wondering what you all do when asked to relocate sockets during a kitchen refit, specifically where you have made a joint in an existing 2G backbox which is no longer going to be used?


Do you just fit a blanking plate over, let the tiler tile over or terminate in wago connectors and let the plaster bury the joint?


Regards Ts
Parents
  • 0
    Dave, if it`s in a wall in a zone or 2" deep then OK. If out of zone and less than 2" deep then no if it`s hidden, is what I meant

Reply
  • 0
    Dave, if it`s in a wall in a zone or 2" deep then OK. If out of zone and less than 2" deep then no if it`s hidden, is what I meant

Children
No Data

Community Rules & Guidelines