Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 47 replies
  • Subscribers 32 subscribers
  • Views 5852 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ZS for an motor run off an inverter

MrJack96
Hi guys. How can you test the zs of a motor run off an inverter drive?
Parents
  • 0
    The definition should stop at an Isolator, a socket, or the first electronic item encountered (dimmer switch thermostat etc.)

    So who (or if you prefer which standard) takes repsonsibility for the 230V cable between the dimmer lightswitch to the light and the connection to the light fitting itself? I'd hate not to be able condemn twisted & taped joints or use of bell wire or lack of earthing to a class I light fitting because it was out of scope of BS 7671.

        - Andy.
Reply
  • 0
    The definition should stop at an Isolator, a socket, or the first electronic item encountered (dimmer switch thermostat etc.)

    So who (or if you prefer which standard) takes repsonsibility for the 230V cable between the dimmer lightswitch to the light and the connection to the light fitting itself? I'd hate not to be able condemn twisted & taped joints or use of bell wire or lack of earthing to a class I light fitting because it was out of scope of BS 7671.

        - Andy.
Children
No Data

Community Rules & Guidelines