Hi, looking to understand if an RCD would be a required regulation (and/or just highly recommended) in the following situation. The additional cost of installing four or five 3-Phase RCDs is quite substantial and I would prefer to avoid it if still deemed as safe and not legally required. Earthing system is TN-C-S.
For connecting up 4x Immersion Elements (9kW, 9kW, 6kW, 3kW) in Brewery Tanks I am looking at either:
A. SWA Cable clipped direct to basket from the Control Panel to IP rated Plugs/Sockets mounted on the wall. Then floating SY Cable (recommended by electrician) from the wall to the Tanks, which is about a 2m run. Thinking Plugs/Sockets just to make life easy if I ever want to move things around and also for easier access for cleaning.
B. Same as above but swapping the Plugs/Sockets for Isolators.
Look forward to your feedback and opinions. Cheers.
