Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 13 replies
  • Subscribers 32 subscribers
  • Views 1863 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Pat test

Former Community Member
Former Community Member
Hi got a quick question well two questions 1st I have been presented with an old morphy Richards kettle with a detachable cord my problem it uses an non iec lead as the design pre dates the iec kettle lead as such I know I have to test the lead and kettle separately my problem is I need an adapter to convert the kettle socket to iec to test it photo provided to show the type I mean
16054506491612840900434432598143.jpg
Parents
  • 0
    There’s no such thing.


    You could test the lead by putting a tester probe into the earth terminal on the kettle socket, but just testing the kettle and the lead as a complete assembly is the best option, because after all you want to know the kettle is earthed when it is plugged into the lead.
Reply
  • 0
    There’s no such thing.


    You could test the lead by putting a tester probe into the earth terminal on the kettle socket, but just testing the kettle and the lead as a complete assembly is the best option, because after all you want to know the kettle is earthed when it is plugged into the lead.
Children
No Data

Community Rules & Guidelines