You can no longer post new replies to this discussion. If you have a question you can start a new discussion
Kettles
Former Community Member
OK 2nd question modern kettles with base power cord system instead of the older lead system but instead the docking system do I test the base separately or test them together as one item
Indeed, and unless you sell kettles and bases separated, a bit pointless.
Actually the physical part of any inspection is by far the most useful, after all things can pass on the meter with big holes in the sides and damaged cables and all sorts.
If you have to then missing out a meter test, that is far less serious then missing the human senses one.... (eyes and feel, for splits in cables and cases and so on, and maybe a sniff for the smell of burning from motors are the key ones here, not taste so much..)
Indeed, and unless you sell kettles and bases separated, a bit pointless.
Actually the physical part of any inspection is by far the most useful, after all things can pass on the meter with big holes in the sides and damaged cables and all sorts.
If you have to then missing out a meter test, that is far less serious then missing the human senses one.... (eyes and feel, for splits in cables and cases and so on, and maybe a sniff for the smell of burning from motors are the key ones here, not taste so much..)
