Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 23 replies
  • Subscribers 32 subscribers
  • Views 1805 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

12 volt outside light recommendations.

Former Community Member
Former Community Member
Hi all. I am in the process of turning my front garden into a driveway. Now on the side of this drive way is a brick wall where I want to put 3 x 12 volt wall lights. I have excavated the ground and dug a trench and put some 20mm conduit for now. What I want to know is are there outside lights that don't come pre wired? I don't want to have any junction boxes on the wall or buried in the ground. Can the electrician wire it with loop in loop out so the only connections are at the light fitting itself so no connections underground etc.


I hope that makes sense.


Regards Lee
Parents
  • 0
    Amazed how you found a light so quick that isn't pre wired. What did you type I wonder as I typed lots of things into Google and I didn't get any information.

    I think I just googled for something like "12V outdoor wall downlight" and skipped over anything that looked like it was a kit. Thinking about it, adding MR16 (the usual, if technically incorrect, reference to a common type of replaceable 12V directional lamp) might narrow it down further - in my experience fitting with moulded-in leads tend to have non-replaceable lamps.


       - Andy.
Reply
  • 0
    Amazed how you found a light so quick that isn't pre wired. What did you type I wonder as I typed lots of things into Google and I didn't get any information.

    I think I just googled for something like "12V outdoor wall downlight" and skipped over anything that looked like it was a kit. Thinking about it, adding MR16 (the usual, if technically incorrect, reference to a common type of replaceable 12V directional lamp) might narrow it down further - in my experience fitting with moulded-in leads tend to have non-replaceable lamps.


       - Andy.
Children
No Data

Community Rules & Guidelines