Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 23 replies
  • Subscribers 32 subscribers
  • Views 1792 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

12 volt outside light recommendations.

Former Community Member
Former Community Member
Hi all. I am in the process of turning my front garden into a driveway. Now on the side of this drive way is a brick wall where I want to put 3 x 12 volt wall lights. I have excavated the ground and dug a trench and put some 20mm conduit for now. What I want to know is are there outside lights that don't come pre wired? I don't want to have any junction boxes on the wall or buried in the ground. Can the electrician wire it with loop in loop out so the only connections are at the light fitting itself so no connections underground etc.


I hope that makes sense.


Regards Lee
Parents
  • Former Community Member
    0 Former Community Member
    Hi. Thanks for your reply. These are basically the lights I want installed. I have put25mm trunking in the ground and want to attach  3 of these to wall in the gravel drive. I don't want to go into the lightfrom the back as that would mean chasing the brick wall. So I want to stand it off the wall to be able together cables in the back and loop into the next light. I don't really want to mount a piece of timber off the wall to be able to run the cable behind and into the back of light.


    Thank you
Reply
  • Former Community Member
    0 Former Community Member
    Hi. Thanks for your reply. These are basically the lights I want installed. I have put25mm trunking in the ground and want to attach  3 of these to wall in the gravel drive. I don't want to go into the lightfrom the back as that would mean chasing the brick wall. So I want to stand it off the wall to be able together cables in the back and loop into the next light. I don't really want to mount a piece of timber off the wall to be able to run the cable behind and into the back of light.


    Thank you
Children
No Data

Community Rules & Guidelines