Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 23 replies
  • Subscribers 32 subscribers
  • Views 1796 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

12 volt outside light recommendations.

Former Community Member
Former Community Member
Hi all. I am in the process of turning my front garden into a driveway. Now on the side of this drive way is a brick wall where I want to put 3 x 12 volt wall lights. I have excavated the ground and dug a trench and put some 20mm conduit for now. What I want to know is are there outside lights that don't come pre wired? I don't want to have any junction boxes on the wall or buried in the ground. Can the electrician wire it with loop in loop out so the only connections are at the light fitting itself so no connections underground etc.


I hope that makes sense.


Regards Lee
Parents
  • Former Community Member
    0 Former Community Member
    Hi. Thanks for this. The fitting instructions would not work for some reason. The gland link did though.


    The conduit is buried in the subsoil under the hard-core and under the gravel which is 300mm deep. You definitely would not be able to dig into this with a spade or a pick axe. So I think it is pretty well protected from mechanical damage.


    Is it not ok to run the cable out of the conduit and into the u box and into the back of the light without conduit upto the u box as the hi turned cable is suitable for service running. It will be only 2 inches of cable from the conduit to the light? I only really want the u box as a mounting bracket to stand the light off the wall so I can gain rear entry for the cable.


    Not sure if it makes much difference but the supply will be fed from the new consumer unit which will all be rcbo's.


    Thanks all. I appreciate your time and advice.


Reply
  • Former Community Member
    0 Former Community Member
    Hi. Thanks for this. The fitting instructions would not work for some reason. The gland link did though.


    The conduit is buried in the subsoil under the hard-core and under the gravel which is 300mm deep. You definitely would not be able to dig into this with a spade or a pick axe. So I think it is pretty well protected from mechanical damage.


    Is it not ok to run the cable out of the conduit and into the u box and into the back of the light without conduit upto the u box as the hi turned cable is suitable for service running. It will be only 2 inches of cable from the conduit to the light? I only really want the u box as a mounting bracket to stand the light off the wall so I can gain rear entry for the cable.


    Not sure if it makes much difference but the supply will be fed from the new consumer unit which will all be rcbo's.


    Thanks all. I appreciate your time and advice.


Children
No Data

Community Rules & Guidelines