Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 13 replies
  • Subscribers 27 subscribers
  • Views 566 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

"weekend Quiz" (Sorry Zoom)

ebee

Does this pic look right ?


aa9a83eae6689ff64afb5ded92834bd4-huge-image-20201127162726-1.png
Parents
  • 0
    From the moulding it appears to be a Clik CT100 which unfortunately is not listed in https://www.scolmore.com/technical_specification_bim/_brochures/Flow/Flow.zip


    I can see the two Browns in the loop terminal, but should there be three Blues into the Neutral terminal?


    So I am going to say, that it does not look right. But that might change if I could see where those three T&Es go to!


    Not helped by what appears to be OUT written in blue on the right hand T&E sheath?

    Clive

Reply
  • 0
    From the moulding it appears to be a Clik CT100 which unfortunately is not listed in https://www.scolmore.com/technical_specification_bim/_brochures/Flow/Flow.zip


    I can see the two Browns in the loop terminal, but should there be three Blues into the Neutral terminal?


    So I am going to say, that it does not look right. But that might change if I could see where those three T&Es go to!


    Not helped by what appears to be OUT written in blue on the right hand T&E sheath?

    Clive

Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines