Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 19 replies
  • Subscribers 32 subscribers
  • Views 2725 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Wago’s pull test

Baldyhugh
Hi all.

I've been using wago’s for a couple of years now and more recently the 221 series mainly on lighting circuits. As I do with all terminations, I do a gentle ‘pull test’ after connection which was drummed into me from apprenticeship days to check if the wire is securely held. I also do this with the wago’s but on occasion find that the wire will pull back slightly but not pull out. It can then be pushed forward again fully up into the terminal. I find that this happens more with solid conductors rather than stranded or flex. My query is, am I damaging the internal workings of the wago by carrying out this pull test? I like the reassurance of a pull test on terminations but should it be given a miss on wago’s?


thanks in advance
Parents
  • 0
    aligarjon:

    I only use the levers if i am connecting a flex as i have never been able to push one into the standard Wago without it just bending over.   If you need to get a smaller cable out of the standard Wago without  destroying it, so maybe to test.  If you push another core of the same size up along side it will pull out with a gentle wiggle if you are careful  (I have only tried it with 1.0mm)  


    Yes, I don't think that the ordinary ones are intended for flex, but there are the straight through ones for lighting with a sort of push button for release.


    I have just tried the second wire trick. It worked for 1.5 mm² and 1.0 mm², but the second wire tends to catch! However, if you use a scrap for the second wire, it can suffer a bit of abuse when you pull it out. 2 x 2.5 mm² doesn't fit. Another good tip! ?


Reply
  • 0
    aligarjon:

    I only use the levers if i am connecting a flex as i have never been able to push one into the standard Wago without it just bending over.   If you need to get a smaller cable out of the standard Wago without  destroying it, so maybe to test.  If you push another core of the same size up along side it will pull out with a gentle wiggle if you are careful  (I have only tried it with 1.0mm)  


    Yes, I don't think that the ordinary ones are intended for flex, but there are the straight through ones for lighting with a sort of push button for release.


    I have just tried the second wire trick. It worked for 1.5 mm² and 1.0 mm², but the second wire tends to catch! However, if you use a scrap for the second wire, it can suffer a bit of abuse when you pull it out. 2 x 2.5 mm² doesn't fit. Another good tip! ?


Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines