Probably a 1st year apprentice question, but can you substitute a NiCd battery of the same voltage/capacity in place of a NiMh without creating charging problems?
As ever, the replies are much appreciated. I believe the existing stick consist of 3, 1.2v/1.3 Ah Sub C cells. The stick is only 145mm in length. Since posting, I discovered this afternoon that they were manufactured by/for Emergency Lighting Products Ltd(Ref B057). I've checked their website with no luck - I'll call tomorrow and see if they are open for enquiries.
Mike, unfortunately the fittings are on site & I won't be back there 'till early in the new year. Meantime, thanks again for your advice/views.
As ever, the replies are much appreciated. I believe the existing stick consist of 3, 1.2v/1.3 Ah Sub C cells. The stick is only 145mm in length. Since posting, I discovered this afternoon that they were manufactured by/for Emergency Lighting Products Ltd(Ref B057). I've checked their website with no luck - I'll call tomorrow and see if they are open for enquiries.
Mike, unfortunately the fittings are on site & I won't be back there 'till early in the new year. Meantime, thanks again for your advice/views.
