This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

SCHNEIDER ISOBAR P DISTRIBUTION BOARDS

I am involved in delivering a big project to install a new MCCB panel and replace 40 DBS.  I have designed and specified all the works.


The new panel and 17 DBs are being installed starting with powering down last Sunday and po wearing up on This Saturday afternoon so the IT team can get their systems up and running for next Monday morning.


I nearly always specify Schneider Isobar DBs because I love their quality and the excellent technical support from Schneider. This job I have specified the new Isobar P DBs. I got see a new one straight out of the box and I have to say I was very impressed. Just lifting an empty board up off the floor to have a look at it the heavy weight says well built quality. Looking at the inside of the board every part seems to be integrated with the other parts not just add ons to an existing design. The board has a separate neutral bar running with the line bus bars. I clipped in an RCBO that picks up both the neutral and earth without the need for flying leads. Of course it has the existing. Isobar switch so individual circuit breakers can be switched on and off and no live exposed tongues with empty spare ways. On this job we have extension boxes with meters but have not used the option yet for the intergrated monitoring of individual circuits. 


I have have no financial connection with Schneider just a happy specifier.

Parents
  • Try adding Grammarly Chris, the only snag is the odd American spelling occasionally, which gives a red line although correct English English! Works well here too....
Reply
  • Try adding Grammarly Chris, the only snag is the odd American spelling occasionally, which gives a red line although correct English English! Works well here too....
Children
No Data