Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 14 replies
  • Subscribers 32 subscribers
  • Views 2096 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Brand new electric shower

Former Community Member
Former Community Member
Brand new electric shower and nothing but cold water? Any ideas? Almost like the tco keeps going but How on a new shower?


I don’t believe the plumber/electrician changed the hose and they just reused existing one as the new one wouldn’t of fit and would have had to had drill holes on show on tiles.
Parents
  • 0
    I’ve actually tried taking the hose off and letting the water run but it can stay warm for about 30 seconds then back to cold

    What do you nned do to get it warm again? I'm just thinking that most thermal cut-outs need a manual reset (press in a little button inside somewhere) - so if just leaving it for a while does it, it might suggest a dodgy thermostat rather than the safety cut-out operating.


      - Andy.
Reply
  • 0
    I’ve actually tried taking the hose off and letting the water run but it can stay warm for about 30 seconds then back to cold

    What do you nned do to get it warm again? I'm just thinking that most thermal cut-outs need a manual reset (press in a little button inside somewhere) - so if just leaving it for a while does it, it might suggest a dodgy thermostat rather than the safety cut-out operating.


      - Andy.
Children
No Data

Community Rules & Guidelines