Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 32 subscribers
  • Views 817 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Electric Towel Rail Concerns in Bathroom.

Zoomup
Hello All,

I recently removed a faulty electrical towel rail from a bathroom. The control panel was not working properly. The thing did not heat at all. It had a label on it saying Kingfisher International. Model.DD3LU-500a. Rated IP24. "Double insulated" with the square within a square logo. It had a 2 core flex. No C.P.C. That conerned me. How can a liquid filled heated towel rail not need earthing?


I believe that Fix Screw sells the same model.

https://www.screwfix.com/p/electric-pre-filled-towel-radiator-980-x-550mm-white-800btu/3012p#product_additional_details_container


Z.
Parents
  • 0
    All depends on the internal construction   a simple mineral tube  'cooker element' type heater screwed into the metal pipe would I agree require a CPC. (and most are a bit like that)

    But if the construction is such that a single fault in the element or its mounting cannot make the case live, then it would be  OK.   I can imagine insulating bushes and a coating of the element being enough to do this.

    IP 24 - so  the 4 tells me it is spray proof from all angles, and the 2 says fingers cannot get to anything dangerous. I must say I would  expect '44 personally - it is quite hard to make something 24 but it is not prohibited by regs.

    M.
Reply
  • 0
    All depends on the internal construction   a simple mineral tube  'cooker element' type heater screwed into the metal pipe would I agree require a CPC. (and most are a bit like that)

    But if the construction is such that a single fault in the element or its mounting cannot make the case live, then it would be  OK.   I can imagine insulating bushes and a coating of the element being enough to do this.

    IP 24 - so  the 4 tells me it is spray proof from all angles, and the 2 says fingers cannot get to anything dangerous. I must say I would  expect '44 personally - it is quite hard to make something 24 but it is not prohibited by regs.

    M.
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines