Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 43 replies
  • Subscribers 32 subscribers
  • Views 9853 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Twin immersion heaters

Former Community Member
Former Community Member
I am in the process of going unvented.  I have to use immersion heaters, and the new cylinder has two.  I have one feed to the existing immersion.  It is on 2.5mm2 T&E and connects to a 32A MCB on the CU.  I'm adding a DP isolating switch in the cylinder cupboard.  Will that be complaint for one of the immersion heaters?

To fully install the cylinder (ie the second immersion), I plan ask an electrician to either
(1) run an additional 2.5mm2 T&E cable back to the CU, connect it to the existing 32A immersion heater MCB at the CU. So the MCB protects two separate cables and the 2.5 T&E is within its capacities. 

Or
(2) run a new 6mm2 T&E cable back to the CU, connect to the existing MCB and in the cylinder cupboard, split the feed to two DP isolators, one for each immersion and its timer.


I'd be grateful for advice - are both approaches compliant?  Is one better than the other?  The amount of work will be similar.
Parents
  • 0
    DC:

    At the mo, it will be one immersion coonnected to the existing circuit, so no notification needed?.  I may have the the upper one appropriately connected later.


    The heating guys are fully qualified and taking care of building regs and the admin on that side.


    What is the kW rating of the elements? Some are just 2kW. Perhaps the top one can just be plugged into a 13 Amp socket.


    The most important thing is to have the pressurised bomb regularly serviced for safety reasons.

    Exploding Unvented Hot Water Cylinder.wmv - YouTube


    Z.


Reply
  • 0
    DC:

    At the mo, it will be one immersion coonnected to the existing circuit, so no notification needed?.  I may have the the upper one appropriately connected later.


    The heating guys are fully qualified and taking care of building regs and the admin on that side.


    What is the kW rating of the elements? Some are just 2kW. Perhaps the top one can just be plugged into a 13 Amp socket.


    The most important thing is to have the pressurised bomb regularly serviced for safety reasons.

    Exploding Unvented Hot Water Cylinder.wmv - YouTube


    Z.


Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines