The IET is carrying out some important updates between 17-30 April and all of our websites will be view only. For more information, read this Announcement

Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 12 replies
  • Subscribers 31 subscribers
  • Views 1609 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Sub Main in Notched Joists. Your Opinion Please.

Zoomup
Here we have a 16.00mmm2 T&E cable installed many years ago in a house, and it supplies a recently renewed consumer unit in an annexe. The cable runs under the first floor boards in notched  wooden joists. The boards are about 15mm thick. There is no mechanical protection apart from the wooden boards. The cable runs centrally to the floor boards  in the notched joists.


What is your opinion about leaving the cable where it is? It is backed up by a 60 Amp fuse in a switch fuse. There is no R.C.D. protection for the sub-main cable.


Z.


Parents
  • 0
    decent safe plates are available from good wholesalers.I think they are 2mmthick.  sounds flimsy but they are pretty study.  They might need dropping into the timber if they lift the board.


    Gary
Reply
  • 0
    decent safe plates are available from good wholesalers.I think they are 2mmthick.  sounds flimsy but they are pretty study.  They might need dropping into the timber if they lift the board.


    Gary
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines