Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 32 subscribers
  • Views 769 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Wiring multiple PIRs to one final circuit?

Former Community Member
Former Community Member
Am I right in thinking that one can wire multiple PIRs switching individual light fitting in a single final circuit? For example, few full height cubicle with dedicated PIR and light fittings but all of them are being fed by one final circuit. As long as the load of the lights are below the rating of the MCB.


Thanks.

Parents
  • 0
    Be aware that some PIR sensors have relay contacts, and these can be safely wired in parallel so that any one sensor turns on the same lights,  however some other designs (the ones that do not click) use electronic switching and do not appreciate being fed volts back up the output side when in the 'off' state. Worth asking the PIR maker if you want to do this.


    Also allow a bit of extra current rating for switch-on inrush, especially if lots of lamps are in parallel and come on together.


    Anther 'gotcha' can occur if lights controlled by one sensor can fool the day/ night sensing of the other then you can get funny conditions where lamp being on can lock another off.


    Mike
Reply
  • 0
    Be aware that some PIR sensors have relay contacts, and these can be safely wired in parallel so that any one sensor turns on the same lights,  however some other designs (the ones that do not click) use electronic switching and do not appreciate being fed volts back up the output side when in the 'off' state. Worth asking the PIR maker if you want to do this.


    Also allow a bit of extra current rating for switch-on inrush, especially if lots of lamps are in parallel and come on together.


    Anther 'gotcha' can occur if lights controlled by one sensor can fool the day/ night sensing of the other then you can get funny conditions where lamp being on can lock another off.


    Mike
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines