This discussion is locked.

You cannot post a reply to this discussion. If you have a question start a new discussion

EICR failed missing trunking?

Former Community Member over 4 years ago

Hi,

I’ve just had an EICR done last week, One item I do not understand and would need an electrician or someone to help please. the EICR report says “MISSING TRUNKING WITH WIRES NOT SUPPORTED C2 SHED.” The cable is clipped on the wood wall in the shed. There are no exposed wires. And the shed is not on escape routes. Does cable need to be in trunking in order to comply with the electrical wire regulation? Is the code 2 correct for this situation? please see photo.

Thank you for help

Parents

0 ebee over 4 years ago

Is a tablelamp with a BC lampholder with no lampshade and no lamp in, on a table 3` from finished floor level.

A C1, C2, C3 or no code.

Same question with a BC lampholder dangling from a ceiling with the empty lampholder at 5` from finished floor level.

I`m talking about bog standard BC lampholders not them fancy expensive things that nobody buys and they auto disconnect the pins on lamp removal
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 ebee over 4 years ago

Is a tablelamp with a BC lampholder with no lampshade and no lamp in, on a table 3` from finished floor level.

A C1, C2, C3 or no code.

Same question with a BC lampholder dangling from a ceiling with the empty lampholder at 5` from finished floor level.

I`m talking about bog standard BC lampholders not them fancy expensive things that nobody buys and they auto disconnect the pins on lamp removal
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data

EICR failed missing trunking?

Community Rules & Guidelines