Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 65 replies
  • Subscribers 32 subscribers
  • Views 10231 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

EICR failed missing trunking?

Former Community Member
Former Community Member

Hi,



I’ve just had an EICR done last week, One item I do not understand and would need an electrician or someone to help please. the EICR report says “MISSING TRUNKING WITH WIRES NOT SUPPORTED C2 SHED.” The cable is clipped on the wood wall in the shed. There are no exposed wires. And the shed is not on escape routes. Does cable need to be in trunking in order to comply with the electrical wire regulation? Is the code 2 correct for this situation?  please see photo.1ff9527a633c65202618bef88f7b0919-original-shed.jpg



Thank you for help


Parents
  • 0
    I suspect that the use of easy-fill software is not helping. So Joe, the inspector, correctly identifies an unsupported cable. He then gets a drop-down list and picks the closest fit. He does not even think about BS 7671 and the code 'cos it is done for him.


    The problem, as we know, is that proper I&T involves a bit more.
Reply
  • 0
    I suspect that the use of easy-fill software is not helping. So Joe, the inspector, correctly identifies an unsupported cable. He then gets a drop-down list and picks the closest fit. He does not even think about BS 7671 and the code 'cos it is done for him.


    The problem, as we know, is that proper I&T involves a bit more.
Children
No Data

Community Rules & Guidelines