Hi,
I’ve just had an EICR done last week, One item I do not understand and would need an electrician or someone to help please. the EICR report says “MISSING TRUNKING WITH WIRES NOT SUPPORTED C2 SHED.” The cable is clipped on the wood wall in the shed. There are no exposed wires. And the shed is not on escape routes. Does cable need to be in trunking in order to comply with the electrical wire regulation? Is the code 2 correct for this situation? please see photo.
Thank you for help
Sparkingchip:
I just looked at those photos and spotted a handy item that wasn't on my list, it's always good to have one of these to hand for that 16 mm twin and earth cable terminated into the fused main switch with its sheath stripped back.
Yep they are useful, but the cover easily unclips and falls off. It is too small for most modern tails though. It is a pity that the switch fuses that come with three ratings of cartridge fuse don't have two of those covers, one for the top and another for the bottom. The ones that I recently bought came with only one. I had tails entering at the bottom and a 16mm2 T&E exiting at the top. A bit tight you may say.
Z.
Sparkingchip:
I just looked at those photos and spotted a handy item that wasn't on my list, it's always good to have one of these to hand for that 16 mm twin and earth cable terminated into the fused main switch with its sheath stripped back.
Yep they are useful, but the cover easily unclips and falls off. It is too small for most modern tails though. It is a pity that the switch fuses that come with three ratings of cartridge fuse don't have two of those covers, one for the top and another for the bottom. The ones that I recently bought came with only one. I had tails entering at the bottom and a 16mm2 T&E exiting at the top. A bit tight you may say.
Z.
