Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 26 replies
  • Subscribers 31 subscribers
  • Views 7192 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

2 plate lighting question

Former Community Member
Former Community Member
Hi all,


New to the forum so please be kind! I'm starting a rewire of my home and have decided for a multitude of reasons to go with wiring the lighting using the 2 plate method(smart light switches and the like mostly requiring neutral). I was intending and can't see any negatives to doing it slightly differently in that I wasn't going to take the feed for following on differently switched lights from the switch, instead I plan to supply one junction box from the consumer unit and then spur off for each room's lighting (may install a second jb depending on how congested the first is looking). 


In doing this I would avoid there ever being a need for more than 3 cables in a single light switch, i.e. worst case scenario i'd have permanent supply (from jb), switched supply to light fitting and lastly in some cases a 3C & CPC for 2 Way switching. Plus in my mind make future installs easier, i.e. any additional feed coming from one central point.


Can anyone think of any good reason not to do the above? Can't see anything in the regs to suggest this would be a problem? 


Cheers all!
Parents
  • 0
    If it was my house I was rewiring, I would (if practical) have all the switch and light-fitting cables converging on one or two Big Boxes-o'Wagos(tm) per level, with the boxes located in e.g. something like an under-the-stairs cupboard or cellar head - either near the ceiling for the lights on this level or near the floor for the lights on the level below. And with a spare core if possible.
Reply
  • 0
    If it was my house I was rewiring, I would (if practical) have all the switch and light-fitting cables converging on one or two Big Boxes-o'Wagos(tm) per level, with the boxes located in e.g. something like an under-the-stairs cupboard or cellar head - either near the ceiling for the lights on this level or near the floor for the lights on the level below. And with a spare core if possible.
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines