This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Underfloor heating regulations - EICR

Former Community Member
Former Community Member
Hi guys 


If underfloor heating has been fitted and basically just spured off from the ring straight to the thermostat, would that need to be flagged on a EICR? 


We don't know who manufactured it, so can't check their recommendations on this particular make and model


Seems a bit rough to me - Feel to flag as I would have wired via an FCU 


Thanks
Parents
  • Former Community Member
    0 Former Community Member
    Thanks for your input guys - Cable off the socket is 2.5mm but not sure what the cable size is on the load side.


    I have since managed to incorporate an FCU on 1, as the socket had 2 spurs off it so alterations were made to make safe.
Reply
  • Former Community Member
    0 Former Community Member
    Thanks for your input guys - Cable off the socket is 2.5mm but not sure what the cable size is on the load side.


    I have since managed to incorporate an FCU on 1, as the socket had 2 spurs off it so alterations were made to make safe.
Children
No Data