Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 35 replies
  • Subscribers 32 subscribers
  • Views 2395 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Choice of motor - application query

simonturner83
Hi

I am currently working on a design concept for a motion system - I would be very grateful for any advice that could be given on a suitable type of motor for the application (e.g. servo, stepper, DC motor etc.).
 The related requirements for the motion system are as follows:
  1. Rotate a cylindrical object placed on its side on friction rollers to allow inspection, where rotation occurs around the axial axis as per test tube rollers or pipe weld rollers.
    1. Details of the cylindrical object:
      1. It is unattached to the rollers, i.e. placed on for rotation / inspection then removed.

    2. Can weigh up to 20kg.



  • The cylindrical object is required to rotate at a very slow speed, typically 1rpm and lower, where the upper limit is likely to be in the region of 15rpm. The friction rollers on the motion system will be in the region of 1/10 to 1/20 of the circumference of the cylindrical object.

  • The rotation of the cylindrical object is required to be significantly consistent, i.e. smooth rotation with minimal stepping / juddering.

  • The motion  profile is likely to just be one full rotation of the cylindrical object at a fixed speed, but there may be a requirement to perform the rotation in increments with pauses in between (i.e. one full rotation split into 6x moves). The duty will be low, i.e. 5-10 such operations per day.

  • Allow some basic position/speed control, where closed-loop is preferable.

Many thanks.



Parents
  • 0
    It sounds to me as if the OP is asking for some bespoke kit to enable inspection and testing of a component via a ultrasonic/ crack detecting or other NDT nature. Some kind of metal cylinder involved in aerospace/nuclear or chemical processing apparatus or munition - shell casing?. It would assist enormously if the exact nature of the component and it's use were made known before everyone jumps in a any further solutions.

    If this is some kind of mission-critical kit, it needs to be right rather than Heath Robinson.
Reply
  • 0
    It sounds to me as if the OP is asking for some bespoke kit to enable inspection and testing of a component via a ultrasonic/ crack detecting or other NDT nature. Some kind of metal cylinder involved in aerospace/nuclear or chemical processing apparatus or munition - shell casing?. It would assist enormously if the exact nature of the component and it's use were made known before everyone jumps in a any further solutions.

    If this is some kind of mission-critical kit, it needs to be right rather than Heath Robinson.
Children
No Data

Community Rules & Guidelines