Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 36 replies
  • Subscribers 32 subscribers
  • Views 6001 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RCD protection in an IT run office

Former Community Member
Former Community Member
Jolly good morning all,


I am currently carrying out an EICR for an IT based company in their head offices.

Looking at the 12way  3-phase distribution board, I can see there are multiple ‘Office Sockets’ circuits labelled up on 32amp MCB’s and not a single RCD in sight. 

To my knowledge, the use of RCD’s is perhaps not required in this type of environment, but just wanted to check your opinions.


Many thanks you’s and I hope everyone is having a splendid dayV?
Parents
  • 0
    Joe


    Again you clearly do not know the difference between an IT system and IT equipment used in an office!


    The problem is you do not know you are not competent to carry out inspection and testing and are probably breaching Regulation 16 of the Electricity at Work Regulations 1989.


    You are also clueless about the installation being a TN-C earthing system!





Reply
  • 0
    Joe


    Again you clearly do not know the difference between an IT system and IT equipment used in an office!


    The problem is you do not know you are not competent to carry out inspection and testing and are probably breaching Regulation 16 of the Electricity at Work Regulations 1989.


    You are also clueless about the installation being a TN-C earthing system!





Children
No Data

Community Rules & Guidelines