Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 36 replies
  • Subscribers 32 subscribers
  • Views 6007 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RCD protection in an IT run office

Former Community Member
Former Community Member
Jolly good morning all,


I am currently carrying out an EICR for an IT based company in their head offices.

Looking at the 12way  3-phase distribution board, I can see there are multiple ‘Office Sockets’ circuits labelled up on 32amp MCB’s and not a single RCD in sight. 

To my knowledge, the use of RCD’s is perhaps not required in this type of environment, but just wanted to check your opinions.


Many thanks you’s and I hope everyone is having a splendid dayV?
Parents
  • 0
    I agree John, he has read the wrong document too, reading 61008 tells you nothing about installations, that is BS7671 territory as we all know. This seems to me to be a clueless unqualified chump of the first order, and that is not at all rude!


    For I&T you need at least C&G 18th edition, 2391/ 2394&95 and MANY years of experience. You can be prosecuted under the EAWR if you are not competent and qualified. Buyer beware....
Reply
  • 0
    I agree John, he has read the wrong document too, reading 61008 tells you nothing about installations, that is BS7671 territory as we all know. This seems to me to be a clueless unqualified chump of the first order, and that is not at all rude!


    For I&T you need at least C&G 18th edition, 2391/ 2394&95 and MANY years of experience. You can be prosecuted under the EAWR if you are not competent and qualified. Buyer beware....
Children
No Data

Community Rules & Guidelines