Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 16 replies
  • Subscribers 34 subscribers
  • Views 2107 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Lighting Wiring Consideration.

Zoomup
I am going to use some Henley Paper Insulated House Wiring cable for a lighting circuit. The manufacturer is W.T. Henley's Telegraph Works Company Ltd., Holborn Viaduct, London E.C.1.I am using their Section CA catalogue.

The cable is called YT type. It is paper insulated house wire.


I am thinking of using 3.029 inch twin cable. It is rated at 7.8 Amps. I will use a 5 Amp fuse in the fuse box.


Q1. What is the cable outer covering made of?


Q.2. What is the weight of the cable per 1,000 yards in cwt?


Q.3. What is the price per 1,000 yards.


The year is 1927, the month June.


Z.


Edit. Some minor typos corrected.
Parents
  • 0
    Why was the old type 3/029 cable only rated at 7.8 amps ?

    I would have expected at least 10 or 12 amps based on cross sectional area, which is similar to modern 1.5mm. I would expect a rating of less than modern cables, but still at least 10 or 12 amps.


    The fuse wire often used to protect domestic lighting circuits was sometimes  described as being "five to ten amps" which I understood to mean a continual loading of 5 amps, and short term use up to 10 amps, when plugging the clothes iron into the lamp socket over the kitchen table.
Reply
  • 0
    Why was the old type 3/029 cable only rated at 7.8 amps ?

    I would have expected at least 10 or 12 amps based on cross sectional area, which is similar to modern 1.5mm. I would expect a rating of less than modern cables, but still at least 10 or 12 amps.


    The fuse wire often used to protect domestic lighting circuits was sometimes  described as being "five to ten amps" which I understood to mean a continual loading of 5 amps, and short term use up to 10 amps, when plugging the clothes iron into the lamp socket over the kitchen table.
Children
No Data

Community Rules & Guidelines