AJJewsbury:
Is there anything unusual on the supply side - e.g. a UPS or power factor correction (e.g. the automatic type that switches capacitors in and out of circuit as the perceived PF changes) - that a even a slight change in a load might be nudging between states?
- Andy.
Hi,
There is a power factor correction unit that i've had a quick look at but in all honesty, a quick check on the display which read 1.0 as you'd expect, and that was about as far as my knowledge could take me with that particular bit of kit ?
One thing i'm looking at now, is what other items are on the same phase. The ring on the other side of the office is on L1 and the problem ring is on L2 along with most of the likely suspects that may or may not cause this type of issue. Things like plotters and printers for vinyl applications in a decals dept and lot's of aircon etc. I think the decals dept go home at 16:00 so i'm going to try and go through some process of elimination outside of the ring itself.
AJJewsbury:
Is there anything unusual on the supply side - e.g. a UPS or power factor correction (e.g. the automatic type that switches capacitors in and out of circuit as the perceived PF changes) - that a even a slight change in a load might be nudging between states?
- Andy.
Hi,
There is a power factor correction unit that i've had a quick look at but in all honesty, a quick check on the display which read 1.0 as you'd expect, and that was about as far as my knowledge could take me with that particular bit of kit ?
One thing i'm looking at now, is what other items are on the same phase. The ring on the other side of the office is on L1 and the problem ring is on L2 along with most of the likely suspects that may or may not cause this type of issue. Things like plotters and printers for vinyl applications in a decals dept and lot's of aircon etc. I think the decals dept go home at 16:00 so i'm going to try and go through some process of elimination outside of the ring itself.
We're about to take you to the IET registration website. Don't worry though, you'll be sent straight back to the community after completing the registration.
Continue to the IET registration site