Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 32 subscribers
  • Views 1493 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Isolating transformer help

MrJack96
fbfff694442d96ab55a4ca1cf11d99ce-huge-2f44b3c6-e82b-49a0-b1bd-1df87196400c.jpg36db8eb65df624d194c4f0d38bc9d37e-huge-858d560a-6a7b-4127-9383-db090315f918.jpg5829e0bca8ccbe2f8ca57ff4780fc9b2-huge-19d0edbf-ea01-407a-9fc4-6ac2c9c6ba51.jpgHi guys I have seen an isolating transformer feeding a single phase pump on site and am unsure if it should be isolated. I can see they have tied the 0v on the 110v side to earth just not the 240v Can anyone give me some advice. Here are some pictures. 


Parents
  • Former Community Member
    0 Former Community Member
    The usual reason for one leg of the 110 V winding being "tied" to earth is to make fault finding on those circuits easier......


    Regards


    BOD
Reply
  • Former Community Member
    0 Former Community Member
    The usual reason for one leg of the 110 V winding being "tied" to earth is to make fault finding on those circuits easier......


    Regards


    BOD
Children
No Data

Community Rules & Guidelines