Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 43 replies
  • Subscribers 27 subscribers
  • Views 12776 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

EICR - Old Rewireable Fuse boards are these acceptable?

Former Community Member
Former Community Member
Hi, 


I need verification that it is ok to keep old style Wylex rewireable fuse boards to pass the EICR. Initially the electrician said this was ok providing they have a cover for the fuses. However he has now changed his mind and saying they need to be replaced with a new consumer unit. Some of the homes do not have a cover on the fuse board and others have had the cover taken off so plug in mcb's can be accomodated. Is this still ok?
Parents
  • 0
    Zoomup:

    The place seems to have become run down and antiquated. Why not modernise the electrics rather than patching up the old stuff?


    Cost, but what price safety?


    Fuse box without additional protection = C3. I do not see how the absence of a cover would change that provided that all the fuse carriers and shrouds are in place; i.e. IP2X protection is intact. If that is not the case, it is C1 (with or without the cover).


    I cannot imagine that there are many circuits required in each CU (4?) so just bite the bullet and bring the installations into the 21st century!


    ETA, if you have got a brand new EICR for each home, half the job of replacing the CUs has already been done.


Reply
  • 0
    Zoomup:

    The place seems to have become run down and antiquated. Why not modernise the electrics rather than patching up the old stuff?


    Cost, but what price safety?


    Fuse box without additional protection = C3. I do not see how the absence of a cover would change that provided that all the fuse carriers and shrouds are in place; i.e. IP2X protection is intact. If that is not the case, it is C1 (with or without the cover).


    I cannot imagine that there are many circuits required in each CU (4?) so just bite the bullet and bring the installations into the 21st century!


    ETA, if you have got a brand new EICR for each home, half the job of replacing the CUs has already been done.


Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines