Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 32 subscribers
  • Views 1035 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Looping Lighting feeds at switches in singles

Baldyhugh
Hi

A few months back I posted a question regarding different methods of connecting lighting feeds and switch feeds at switches in singles conduit cable. My question was more from an eddy current perspective. I’m currently working on a job with steel trunking where the drops to switches and sockets etc from the steel trunking are in plastic conduit and the switches / sockets are plastic. My previous post queried whether having just live / switch live and earth down through a single hole in the trunking to the switch or live/neutral/earth supply to switch and live/neutral/earth out to the light through a single hole in the steel trunking was acceptable. I opted for the latter. My question now is can I take a permanent feed to the next switch from the previous switch? In effect I’ll have l/n/e supply to switch and l/n/e to the light and l/n/e to the next switch, so 9 cables at the switch position all through a single hole in the steel trunking. I know this method is used in domestic settings with t&e cable but singles in conduit has the flexibility of running each single cable directly where it needs to go but from an eddy current perspective having all my single cables through the single hole in the metal trunking down to the switch gives me peace of mind. Thanks in advance
Parents
  • 0
    Having the live feed to a switch, and the switched live from the switch to the lamp passing through a single hole or conduit is fine.

    The current "goes" along one wire and "returns" along the other, thereby producing no significant magnetic fields or eddy currents.


    Slightly more complex arrangements with multiple switches are also fine provided that "go" and "return" currents are all passed through the same conduit or hole in metal trunking.


    What should be avoided is a SINGLE wire without the corresponding wire that carries current in the other direction. I doubt in practice that it matters much for the modest currents in a typical lighting circuit, but still poor practice and arguably prohibited.
Reply
  • 0
    Having the live feed to a switch, and the switched live from the switch to the lamp passing through a single hole or conduit is fine.

    The current "goes" along one wire and "returns" along the other, thereby producing no significant magnetic fields or eddy currents.


    Slightly more complex arrangements with multiple switches are also fine provided that "go" and "return" currents are all passed through the same conduit or hole in metal trunking.


    What should be avoided is a SINGLE wire without the corresponding wire that carries current in the other direction. I doubt in practice that it matters much for the modest currents in a typical lighting circuit, but still poor practice and arguably prohibited.
Children
No Data

Community Rules & Guidelines