This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Repairing insulation

What is acceptable practice to repair basic insulation when it’s been nicked. Can we use self amalgamation tape or should we cut and trough crimp? 


thanks guys
Parents
  • A small piece of damaged cable sheath can be repaired with good quality P.V.C. insulation tape.. BUT these days the quality of that is very poor in many cases and it may have carp glue, thus allowing the tape to come loose over time, especially if used in warm conditions. If  possible the section could be oversleeved. If the damage is very bad replacement of the damaged cable will be required. If there is sufficient space the cable can be cut through and a junction box (joint box) used to re-terminate. You have not specified the cable size or type.


    Z.
Reply
  • A small piece of damaged cable sheath can be repaired with good quality P.V.C. insulation tape.. BUT these days the quality of that is very poor in many cases and it may have carp glue, thus allowing the tape to come loose over time, especially if used in warm conditions. If  possible the section could be oversleeved. If the damage is very bad replacement of the damaged cable will be required. If there is sufficient space the cable can be cut through and a junction box (joint box) used to re-terminate. You have not specified the cable size or type.


    Z.
Children
No Data