Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 43 replies
  • Subscribers 32 subscribers
  • Views 7169 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Plastic switch in external meter box

aligarjon
Can i fit a plastic switch fuse such as an 800kmf in the external meter box or does it have to be metal.   I am not interested in the dno view, they always seem to be happy with our switch gear in there around here so long as we leave them enough room.



Gary
Parents
  • 0
    From MEM data sheets.

    Single pole & neutral switchfuseThe 800KMF is a fully moulded, compact wall mounted.....


    .....dataSpecification

    Product standard IEC/EN 60947-3

    You cannot interchange or replace the switch or fuse holder base without destroying it.  It is moulded case, there is no enclosure to replace, it is part of the product. If there is a problem you replace the whole unit. It is not manufactured as an assembly to BS EN  61439-3 as it is not a consumer unit and it has not got a separate enclosure that you can re-configure the internals.
    Back in 2015, people flapped about and, for a very short period [ short enough so no one noticed the foolishness of it ], there were “metal versions” advertised by those trying to get on the bandwagon. Strangely all vanished now…




Reply
  • 0
    From MEM data sheets.

    Single pole & neutral switchfuseThe 800KMF is a fully moulded, compact wall mounted.....


    .....dataSpecification

    Product standard IEC/EN 60947-3

    You cannot interchange or replace the switch or fuse holder base without destroying it.  It is moulded case, there is no enclosure to replace, it is part of the product. If there is a problem you replace the whole unit. It is not manufactured as an assembly to BS EN  61439-3 as it is not a consumer unit and it has not got a separate enclosure that you can re-configure the internals.
    Back in 2015, people flapped about and, for a very short period [ short enough so no one noticed the foolishness of it ], there were “metal versions” advertised by those trying to get on the bandwagon. Strangely all vanished now…




Children
No Data

Community Rules & Guidelines