Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 31 subscribers
  • Views 1336 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

SPD Location In this setup.

Former Community Member
Former Community Member
Good Evening.


Not posted on this new forum yet, had to re-register as it didn't seem to bring my account from the old forum across.

https://app.photobucket.com/u/A13XAV/p/e3c5a6b5-a384-4bc5-9a82-15ed88fd6a56


I have a requirement to fit an SPD on this installation. Where would you think it is best to situate the SPD? I know it should be no more than 0.5m but in this setup, would it be best half way up straight off the henley blocks? I plan to fit an enclosure with a SPD and MCB to protect it.


Unsure at the moment if that DNO incommer is 2 phases off a 3 phase transfomer or split phase at 180deg / 480V, we have not started work on it or tested anything yet. Just at the quoting stage.


Many Thanks.




Parents
  • 0
    The only place physically seems to be to the left of the main isolator, so quite tight; but what a pleasure to see such tidy work! ?


    (Not sure about Mrs Mop's bucket though.)
Reply
  • 0
    The only place physically seems to be to the left of the main isolator, so quite tight; but what a pleasure to see such tidy work! ?


    (Not sure about Mrs Mop's bucket though.)
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines