Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 26 replies
  • Subscribers 32 subscribers
  • Views 2726 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IEC connector under a bath.

Sparkingchip
I presume an IP rated 10/250  IE C320-1 trailing socket plugged into a panel socket on a control panel under a bath in a domestic bathroom is acceptable, because it is classed as a connector rather than a plug and socket?


I am pretty confident that is acceptable, it’s the other end of the flex I am concerned about, but just want to double check this end is okay.


Parents
  • 0
    In common sense terms rather than as strictly stated. What risks do plug and sockets have that connectors do not have. In other words should we be thinking "Well this is very similar to XXX" or" that is not very similar to XXX"
Reply
  • 0
    In common sense terms rather than as strictly stated. What risks do plug and sockets have that connectors do not have. In other words should we be thinking "Well this is very similar to XXX" or" that is not very similar to XXX"
Children
No Data

Community Rules & Guidelines