This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Coding, basically!

Assume a scenario where everything else in a domestic property is satisfactory but with the following exceptions -

Consumer unit is plastic but not in an escape route.

Consumer unit is MK 16th ed split load, with single RCD protection on one side but with the mcbs replaced by RCBOs for all circuits on the other side.

No surge protection present, and all other devices function correctly.

Tails are 16mm but there a 60A fuse in the cut out - verified during a meter change recently.


So, what, if any coding should be applied? I am at a complete loss to fail it in any respect.

Parents


  • My take would be that the owner should be responsible for a good visual walk round post -let to ensure that no physical damage has occurred to any accessories or appliance flexes


    I agree, and that needs to be done after EVERY group leaves the holiday home. Are the smoke alarms still working and  the CO alarms. Are  they still in place? Has somebody borrowed the fire extinguisher or fire blanket? Has somebody spilled liquid down the wall heater or inside it?


    etc. etc. etc.


    Z.


Reply


  • My take would be that the owner should be responsible for a good visual walk round post -let to ensure that no physical damage has occurred to any accessories or appliance flexes


    I agree, and that needs to be done after EVERY group leaves the holiday home. Are the smoke alarms still working and  the CO alarms. Are  they still in place? Has somebody borrowed the fire extinguisher or fire blanket? Has somebody spilled liquid down the wall heater or inside it?


    etc. etc. etc.


    Z.


Children
No Data