Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 27 replies
  • Subscribers 32 subscribers
  • Views 2865 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Coding, basically!

whjohnson
Assume a scenario where everything else in a domestic property is satisfactory but with the following exceptions -

Consumer unit is plastic but not in an escape route.

Consumer unit is MK 16th ed split load, with single RCD protection on one side but with the mcbs replaced by RCBOs for all circuits on the other side.

No surge protection present, and all other devices function correctly.

Tails are 16mm but there a 60A fuse in the cut out - verified during a meter change recently.


So, what, if any coding should be applied? I am at a complete loss to fail it in any respect.

Parents
  • 0
    Just be careful that you won't be held to account for the one time you forget to tell them and something happens, none of us are infallible - You'll be on the hook if they turn around and say "Well, he usually flags up problems but this time he forgot to remind me, so I suppose it's his fault.........."
Reply
  • 0
    Just be careful that you won't be held to account for the one time you forget to tell them and something happens, none of us are infallible - You'll be on the hook if they turn around and say "Well, he usually flags up problems but this time he forgot to remind me, so I suppose it's his fault.........."
Children
No Data

Community Rules & Guidelines