The IET is carrying out some important updates between 17-30 April and all of our websites will be view only. For more information, read this Announcement

This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

4mm2 twin and earth cable

Former Community Member
Former Community Member
regarding 4mm2 cable was it ever available in the old colours with solid conductors rather than the 7 strands version? Ive just done a pre - inspection of a property before doing an EICR and found 2 radial circuits fed from 32A MCBS. The cables appear to be  larger than 2,5mm2 . I'm going back to inspect this property with a view to reducing the MCB's to 20A if if they are 2.5mm2. I'm also taking  a Vernier  gauge to measure the cable diameters and compare to reference tables.

The installation is approximately 30 years old but is in very good condition.
Parents
  • "A 20 amp cartridge/mcb backs up 20 amp cables"


    Well spotted, should be 2.5mmsq  cables!!!


    As regards Ally cable, Im going to bed, check tomorrow. Thanks again.


    Regards UKPN
Reply
  • "A 20 amp cartridge/mcb backs up 20 amp cables"


    Well spotted, should be 2.5mmsq  cables!!!


    As regards Ally cable, Im going to bed, check tomorrow. Thanks again.


    Regards UKPN
Children
No Data