The IET is carrying out some important updates between 17-30 April and all of our websites will be view only. For more information, read this Announcement

Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 31 subscribers
  • Views 1065 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Sub-comms Cabinet - Components

Apostolos
Hi

I dont know if this is a suitable place to ask this however I will give it a try...

I have a tall building of 14 storeys

The main comms cabinet is on the ground floor and we shall install a sub-comms cabinet on the 10th floor that will do floors 6-14. Totally 150 x CAT6 will depart from this sub cabinet to various RJ45 sockets on floors 6-14.

This sub cabinet will be connected with Fiber Optic cable back to the main comms cabinet

We are going to use 1U 24 port patch panels in the sub-cabinet to satisfy these 150 points. So we shall have at least 7 or these racks.

My understanding is that ALL ACTIVE equipment will be housed in the main comms cabinet.

Where is the FO cable going to connect within the sub cabinet?

Does it go directly on the 24-port patch panels?

Does it go to a rack mounted kit above the patch panels and from there goes to the patch panel racks inside the sub cabinet?

Excuse my ignorance around comms networks.

This is going to be the job of the sub contractor that we are going to empoy.... however I would like some insight before we talk to him

Any help is highly appreciated

Cheers

Parents
  • 0
    that makes perfect sense, but I always think using fibre converters instead of having a switch with a module in it is a bit amateur on a new installation. 


    as with everything, there are countless ways to do it, and countless opinions.


    what you suggest should be fine, assuming someone has worked out the traffic loading on the network
Reply
  • 0
    that makes perfect sense, but I always think using fibre converters instead of having a switch with a module in it is a bit amateur on a new installation. 


    as with everything, there are countless ways to do it, and countless opinions.


    what you suggest should be fine, assuming someone has worked out the traffic loading on the network
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines