This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IP2X inside enclosures

Generally these days everything live(*) inside an enclosure like a CU (accessible only with a tool yada yada) seems to be IP2X - e.g. recessed terminal screws on MCBs, busbar covers, etc.


Is there anything in BS 7671 which enforces this? Or product standards like BS EN 61439? Or is it just down to good practice by the manufacturers?


(*), well, line anyway.
Parents
  • So a consumer unit with a bus bar cover removed is still compliant as acess is needed with uses of a tool and the CU is labelled stating to turn off main switch before removing cover?
Reply
  • So a consumer unit with a bus bar cover removed is still compliant as acess is needed with uses of a tool and the CU is labelled stating to turn off main switch before removing cover?
Children
No Data