Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 32 subscribers
  • Views 1419 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Bad Advice? Water Heater.

Zoomup

"Due to their point-of-use installation these units also benefit from minimal standing heat loss, and when added to the fact that, because this heater is only 3kW, unlike instantaneous water heaters, it can be spurred off a ring main rather than requiring its own dedicated circuit and then it becomes clear why the Redring WS7 Water Heater has quickly become a firm favourite."



Outlet Spout: 300mm


Is this really sensible advice. Years ago we put 3kW immersion heaters on a dedicated radial circuit. Is this advice a backwards step?


Z.


Parents
  • 0
    The original design for socket ring circuit allowed for two 3 kW point loads, this is one 3 kW point load so the circuit can accommodate another one as well.
Reply
  • 0
    The original design for socket ring circuit allowed for two 3 kW point loads, this is one 3 kW point load so the circuit can accommodate another one as well.
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines