This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

1930s Wiring.

I attended an ex WW2 military barracks hut today. Timber construction now. It is used as a holiday chalet for visitors. Nice rubber insulated cables. Not in bad condition considering their age. Nice brown circular M.E.M. bakelite tumbler light switches. Also the earthing conductor (7 strand tinned copper) at the earth rod just came away from the rod when inspected.


There was a problem though. A light switch did not turn off the kitchen light, it just stayed on.  It was suspected to be faulty. I removed it, lubricated it, although the original grease was still quite good but limited. The switch was replaced and the light still stayed on constantly. When the switch was taken off the wall again the kitchen light still stayed on continually with no wall switch fitted. I suspect that the switch live and permanent supply live have melded together under pressure at the lighting point.


These old installations are just so interesting.


Repairs tomorrow.


Z.
Parents
  • Seems they were easy enough to put up  im guessing those men had done it all before since they seemed to know exactly.what to do. Ours was between 2 farmers fields but beyond that I don't know of the history of why it was there. I've never heard of the American lighting wiring system sounds down right dangerouse  I 5hink it would be lethal on a 240 or 220 volt supply but probably just about acceptable on 110 or 127 volts. Bearing in mind how technically advanced the yanks are there electrics seem really bad  shame really
Reply
  • Seems they were easy enough to put up  im guessing those men had done it all before since they seemed to know exactly.what to do. Ours was between 2 farmers fields but beyond that I don't know of the history of why it was there. I've never heard of the American lighting wiring system sounds down right dangerouse  I 5hink it would be lethal on a 240 or 220 volt supply but probably just about acceptable on 110 or 127 volts. Bearing in mind how technically advanced the yanks are there electrics seem really bad  shame really
Children
No Data