Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 28 replies
  • Subscribers 32 subscribers
  • Views 2529 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Outbuilding consumer unit

Former Community Member
Former Community Member
Coming back to this wretched EICR at my daughter's house


An outbuilding used as an office is supplied by a 6mm^2 T&E carried from the house on a catenary wire.and fused at the house at 32A (RCD protected)

In the garage the the 6mm^2 is split into a 2.5mm^2 for sockets and a 1mm^2 for the lighting

This is coded C2 for the inadequate protection and C3 for using T&E outdoors.  Both of which seem reasonable


Q1  Can I put a two unit CU in the outbuilding with just a 6amp and 16amp MCB or do | need also to provide a two pole switch?

Q2  What do the great and the good think of using T&E outdoors?  Should I replace it with hi-tuf?
Parents
  • Former Community Member
    0 Former Community Member
    dcbwhaley:

    No.  THe C3 is because it has no mechanic protection and is low enough for a six footer to touch

    I suppose protection from UV could be provided by simply wrapping Gaffer tape around it :-)

     


    Strange, its perfectly acceptable to clip a length of T&E down a wall to a light switch that's low enough for a three footer to touch. Is the cable likely to sustain any damage the way it is installed?  Hituf is also not mechanically protected, just a bit tougher than T&E. Cables that are both insulated and sheathed like T&E and Hituf are suitable for touching as far as I'm aware.


Reply
  • Former Community Member
    0 Former Community Member
    dcbwhaley:

    No.  THe C3 is because it has no mechanic protection and is low enough for a six footer to touch

    I suppose protection from UV could be provided by simply wrapping Gaffer tape around it :-)

     


    Strange, its perfectly acceptable to clip a length of T&E down a wall to a light switch that's low enough for a three footer to touch. Is the cable likely to sustain any damage the way it is installed?  Hituf is also not mechanically protected, just a bit tougher than T&E. Cables that are both insulated and sheathed like T&E and Hituf are suitable for touching as far as I'm aware.


Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines