This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Fire Alarm Design for Stately Homes

Morning All


As always, hoping someone can steer me in the right direction and pass on valuable advice/ recommendations:


Does anyone know if there are any specific fire alarm regulations/ requirements when designing a fire alarm system for a stately home.  This is an actual residence for a family, but due to the size of the property, the fact that the family employ staff to work within the home (7am-7pm, not 24/7), I feel that the normal application of fire alarm design for a 'regular' residential property may perhaps not be sufficient.


When reviewing the plans for the home, there are a lot of single points of egress (obviously as this was designed as a home not a business premises) and there are a lot of evacuation routes which appear to be greater than those you would normally use/ design when developing a fire alarm system for example within a business premises.


So, any advice as always would be hugely helpful and gratefully received.


Regards


Adrian B
Parents
  • You cannot start the design without a Fire Risk assessment and an escape plan which will lead to the Fire strategy for the building. The insurer should also be consulted for their requirements and also the local conservation officer.
Reply
  • You cannot start the design without a Fire Risk assessment and an escape plan which will lead to the Fire strategy for the building. The insurer should also be consulted for their requirements and also the local conservation officer.
Children
No Data