Hi All
A scenario …
Commercial building
Metalclad distribution board (memshield 2)
Sockets on rcbo's
Lighting on MCB
On a condition report obviously the lighting circuit does not meet the 18th edition
(cable buried less than 50mm)
But, the regs themselves say you cannot fail a test due to the regs not being currently,met if they would have met the previous edition
And, how can this then not be a C2? and how could pretty much every old board not fail?
Ok…
What I am really asking is..
On an EICR How can I pass a test when the cables are not buried less than 50mm on an otherwise good installation??? But not Not rcd protected
