Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 12 replies
  • Subscribers 34 subscribers
  • Views 2281 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

LED lamp startup currents and MCB/RCBO

psychicwarrior

Hello forum , good day to all

Accepting it can be a bit more involved science wise, but will any of you please share [if you use/have] a general/simple ‘formula’ or 'rule of thumb'  for working out how many LED lamps that a MCB/RCBO Type B or C of some rating is able to switch and not end up nuisance tripping on same-time startup  ?

 

Regards

Habs

 

Parents
  • 0

    Sadly agree, there is very little standardization even about how to repeatably measure inrush, and how fast an event can be before it  can be ignored. 

    This leaves us with calling the makers or trying a few.

    M.

Reply
  • 0

    Sadly agree, there is very little standardization even about how to repeatably measure inrush, and how fast an event can be before it  can be ignored. 

    This leaves us with calling the makers or trying a few.

    M.

Children
No Data

Community Rules & Guidelines