This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

400v 3P Disboard Distance from Belfast sink

Former Community Member
Former Community Member

Hello all,

Just had a sprinkler valve set incorrectly installed too far to the right on site that prevents a sink being installed to the right of the sprinkler valveset. As such, the solution would be to install the sink to the left of the valveset but this now puts the sink within the proximity of a 400v 3P disboard. Does anyone know the minimum distance that is required to be between the two? We are considering installing a partition to ensure safety however I would like to know what the regulations actually require. Any assistance would be appreciated as i predominantly have a mechanical background. Thanks in advance!

Parents
  • Hi Dave this was the answer given by Electrical Safety First from this question they printed.

    Q1.54 How close can an accessory and/or consumer unit or distribution board be installed to a sink or to a wash basin to protect from splashing?

    You might disagree but that’s the guidance, your surely not saying it’s ok to install a distribution board above a sink?

Reply
  • Hi Dave this was the answer given by Electrical Safety First from this question they printed.

    Q1.54 How close can an accessory and/or consumer unit or distribution board be installed to a sink or to a wash basin to protect from splashing?

    You might disagree but that’s the guidance, your surely not saying it’s ok to install a distribution board above a sink?

Children
No Data